What is the reason that the strapping is not delivered?
September 02, 2019
The failure to send the packaged tape in place is a common fault of the baler. The baler can cause the Strapping to be incomplete during the use process because of various reasons. In the process of using, we often encounter the situation that the Packing Tape is not delivered. In order to ensure the high efficiency of the packing of the packing machine, the Packing Belt can be smoothly brought into place. We understand what is causing the packing belt not to be delivered. ?
In the process of using the baler, the most common fault is that the baler is not delivered properly. If the fault occurs frequently, it will affect the service life of the baler and reduce the binding efficiency of the baling belt. What is caused by the failure of the strapping machine due to a failure of the organization or a problem with the warehouse?
The baler takes the lead and splits - after the splitting of the head of the strapping belt, the conveyor belt is not running smoothly in the lane. The cause of splitting is due to too much binding force. Adjust the binding force.
The pressure strip is too low - the pressure strip is set to make the strap more convenient to bundle the product, but if the adjustment is too low, the gap at the bottom of the pendulum will be shortened, which will affect the free advance and retreat of the strap. Sending the tape is not in place, so we must promptly increase the position of the press belt.
The top knife is not fixed firmly - if the top knife on the middle top body cannot be fixed, displacement will occur. This will cause the lead of the packing belt to be misaligned because of no guide. Therefore, the middle top knife must be adjusted or disassembled. To be fixed.
The quality problems of balers and strapping belts - if the width or thickness of the straps is too large or too small, the straps may not be delivered properly. Therefore, it is necessary to check whether the straps and balers can be used together before use.
